At BIOSRX we engineer adapters for centrifugal mixers that facilitate mixing and reduce unnecessary transfers between containers. The main benefits being markedly reduced waste and cleaning equipment. The video above shows a single adapter for TICKER, TICKER Unlimited, and TICKERmini. The operator simply places a fully assembled TICKER inside the adapter and the mixing can take place right away. An optional cap is also provided.
TICKER ADAPTERS FOR CENTRIFUGAL MIXERS
|TICKER ADAPTER FOR CENTRIMIX 8S, 300SS||THE CAP SCREWS ON TOP|
Height: 3.77 in
Top diameter: 3.31 in
Bottom diameter: 3.015 in
Weight: 146 grams
Material for cap: Polypropylene (PP)
Material for TICKER® Adapter: Polylactic Acid (PLA)
Total Weight for counterbalance: -25g (subtract 25 grams from total weight)
Recommended mixing speed: 2000 RPM
Recommended mixing time: 4 minutes
Recommended mixing volume: 10-20 mL
*The optimal mixing volume in centrifugal mixing systems is 50% of the container’s total volume. If the ideal volume is not achieved, you will need to compensate by increasing the time and speed of the mixer. Filling applicators with product up to the container’s maximum capacity may result in suboptimal mixing. Thus to improve product mixtures, you will likely have to increase the mixing time AND mixing speed in order to compensate.
Cleaning and Care Instructions
Disinfect with 70% isopropyl alcohol. Occasionally, may use a solution of water and gentle soap to rinse and fully allow adapter to air dry.
Make sure the safety lid is properly aligned and fits tight against the adapter
Do not wash in dishwasher
Avoid submerging in water or other cleaning solutions
Do not expose to heat
Do not fill with liquids, as it may ooze